Sms Commands: Unterschied zwischen den Versionen

Aus ARTECO Wiki
Zur Navigation springen Zur Suche springen
Zeile 18: Zeile 18:
 
  normal | rtk | dgps | cmr (Set System-Mode)
 
  normal | rtk | dgps | cmr (Set System-Mode)
  
ep | d1 |d2 | m2 | o2| ru | a1 (Set GPRS APN/User/Password -> Provider)
+
  on | off | ein | aus (Schaltausgang)
 
 
  on | off | ein | aus
 
  
 
  spam | nospam (Set Position Spam[1Sec.] on/off)
 
  spam | nospam (Set Position Spam[1Sec.] on/off)
Zeile 37: Zeile 35:
  
 
  roaming {yes/no} (GPRS aus dem Ausland erlauben / Default = no)
 
  roaming {yes/no} (GPRS aus dem Ausland erlauben / Default = no)
 +
 +
di {DI0,DI1,DI2,D3} (Kofiguration der Device ID)

Version vom 24. August 2010, 10:41 Uhr

!!! ACHTUNG - IN ARBEIT !!!
Diese Seite ist unvollständig und noch in Bearbeitung.



SMS - Befehle

status (Get System-State)
delete | reset (for intern use)
update {FileName} (update ohne Parameter = V2.27)

Legende:
         efb.img  -> first-227.fw
         efb2.img -> all-227.fw
         
         all-last.fw    -> all-227.fw
         first-last.fw  -> first-227.fw
         little-last.fw -> little-227.fw
normal | rtk | dgps | cmr (Set System-Mode)
on | off | ein | aus (Schaltausgang)
spam | nospam (Set Position Spam[1Sec.] on/off)
dn {number} (Set Drive Number)
mc {value} (Set Move Check / 0 = off / Default = 50[512 = ca. 2G])
pc {value} (Set Power Check / 0 = off / Default = 250[ca. 8 Volt])
hb {hours} (Heartbeat / sendet alle "hours" eine Position)
ps {hours} (Power Save / schaltet nach "hours" die externe Stromversorgung und GPS aus)
pi {sec.} (Position Interval) (2 bis 300 Sekunden / Default = 60)
roaming {yes/no} (GPRS aus dem Ausland erlauben / Default = no)
di {DI0,DI1,DI2,D3} (Kofiguration der Device ID)