Sms Commands: Unterschied zwischen den Versionen

Aus ARTECO Wiki
Zur Navigation springen Zur Suche springen
Zeile 9: Zeile 9:
 
   
 
   
 
  Legende:
 
  Legende:
           efb.img  -> first-221.fw
+
           efb.img  -> first-224.fw
           efb2.img -> all-221.fw
+
           efb2.img -> all-224.fw
 
            
 
            
           all-last.fw    -> all-221.fw
+
           all-last.fw    -> all-224.fw
           first-last.fw  -> first-221.fw
+
           first-last.fw  -> first-224.fw
           little-last.fw -> little-221.fw
+
           little-last.fw -> little-224.fw
  
 
  normal | rtk | dgps | cmr (Set System-Mode)
 
  normal | rtk | dgps | cmr (Set System-Mode)
  
  ep | d1 |d2 | m2 | o2| ru (Set GPRS APN/User/Password -> Provider)
+
  ep | d1 |d2 | m2 | o2| ru | a1 (Set GPRS APN/User/Password -> Provider)
  
 
  on | off | ein | aus
 
  on | off | ein | aus
Zeile 29: Zeile 29:
  
 
  pc {value} (Set Power Ckeck / 0 = off / Default = 250[ca. 8 Volt])
 
  pc {value} (Set Power Ckeck / 0 = off / Default = 250[ca. 8 Volt])
 +
 +
hb {hours} (Heartbeat / sendet alle "hours" eine Position)
 +
 +
pi {sec.} (Position Interval) (2 bis 300 Sekunden / Default = 60)

Version vom 19. Mai 2010, 14:53 Uhr

!!! ACHTUNG - IN ARBEIT !!!
Diese Seite ist unvollständig und noch in Bearbeitung.



SMS - Befehle

status (Get System-State)
delete | reset (for intern use)
update {FileName} 

Legende:
         efb.img  -> first-224.fw
         efb2.img -> all-224.fw
         
         all-last.fw    -> all-224.fw
         first-last.fw  -> first-224.fw
         little-last.fw -> little-224.fw
normal | rtk | dgps | cmr (Set System-Mode)
ep | d1 |d2 | m2 | o2| ru | a1 (Set GPRS APN/User/Password -> Provider)
on | off | ein | aus
spam | nospam (Set Position Spam[1Sec.] on/off)
dn {number} (Set Drive Number)
mc {value} (Set Move Check / 0 = off / Default = 50[512 = ca. 2G])
pc {value} (Set Power Ckeck / 0 = off / Default = 250[ca. 8 Volt])
hb {hours} (Heartbeat / sendet alle "hours" eine Position)
pi {sec.} (Position Interval) (2 bis 300 Sekunden / Default = 60)