OSCpc Versions 2010

R951 | 31.12.2010 00:08

[ADDED] fixedtacho value for travels - indicating the fixed tacho value used for calculation
[ADDED] rightclick menu for drivelog table model to set the fixed tachodialog
[CHANGED] some location window stuff; eg added editing of customername/contact

R950 | 30.12.2010 23:18

[CHANGED] user-config temperature limits: replaced min/max value pair by an upper limit for each
          sensor. Makes it possible to have different default values for different sensors.
          (current defaults:  T1=-15°C, T2=+7°C, T3=off, T4=off  ("off" means: no limit))
[CHANGED] systemform: moved user-config things from tab "configuration" to "master data"
[FIXED]   systemview: gui things (license plate bold when selected, euroscan timestamp
          without brackets and right-aligned, tooltip for euroscan timestamp with full date)
[UPDATED] --> beta 6.15

R949 | 29.12.2010 21:40

[ADDED] default coworker to system

R948 | 28.12.2010 19:02

[FIXED] backup-properties wanted to be saved to webservice. omitting them in resourceToXml().

R947 | 28.12.2010 18:15

[CHANGED] GarminMessageTableModel: replaced message type icons by strings  "(?)" / "(!)"

R946 | 28.12.2010 17:38

[ADDED]   resetting resources to last clean state when user discards usermade changes; fixes todo in GenericWindow.
[UPDATED] --> beta 6.14

R945 | 23.12.2010 19:07

[FIXED] system deletion should work again
[CHANGED] commented newResource() on resourceDelete() and added virtual clear() for forms
[CHANGED] only relevant locations are added to the drivers log dialog map

R944 | 23.12.2010 18:53

[FIXED]   SystemTimeline: travels got selected sometimes when dragging timeline
[FIXED]   ConfigWindow: enable disabled colorpickers when associated Temperature checkboxes get checked
[ADDED]   ArchiveReport: show IOs with resolved names, where available
[ADDED]   ConfigWindow: checkbox "show IOs?"
[ADDED]   crash in positionsync when changing customer
[UPDATED] --> beta 6.13

943 | 23.12.2010 15:02

[FIXED] some timekeeping preloading stuff, until we have time for a cleaner solution whole timekeepings of coworker gets preloaded

942 | 23.12.2010 14:33

[UPDATED] SystemTimeline: draw all selected temperature curves (as selected in config window);
          draw min/max value lines; draw temperature curves with user defined colors
[ADDED]   ConfigForm: colorpicker for Temperature color values
[FIXED]   HTTP error when creating new local Garmin (messages loaded too early w/out valid uuid)
[ADDED]   config.h: some default color values
[UPDATED] --> beta 6.12

941 | 22.12.2010 18:03

[ADDED] more visual loading feedback for driverslog stuff as eg huge location lists are getting ugly
[ADDED] small improvements in the driverslog dialog/table; Big Todos are still saving and printing though its quite usable now :)

940 | 22.12.2010 13:51

[ADDED] some translations

R939 | 21.12.2010 21:15

[ADDED]   System: support for user-config
[ADDED]   SystemForm: access to user-config fields "speed-max" and optionally "temp-min" and "temp-max"
[CHANGED] Timeline: max-speed is now system specific. read it from system->userConfig() or settings or config.h;
          draw temperature warnings in red, when temperature goes out of min/max values;
          removed zero-degrees-line
[UPDATED] --> beta 6.11

R938 | 21.12.2010 19:17

[ADDED] travelReport property to system
[ADDED] companyName/Contact property to location
[CHANGED] improved driverlog dialog activated some systems for sample data

R937 | 20.12.2010 19:12

[ADDED]   TravelReport: filtering over column "destination text"
[ADDED]   ArchiveReport: filtering over column "status" (multiple values possible, separated by comma)
[UPDATED] SystemTimeline/TimelineControl: Disable zoomIn/zoomOut button when max zoom in / max zoom out is reached
[UPDATED] ClickableLabel: emit clicked() only if widget is enabled
[UPDATED] --> beta 6.10

R936 | 17.12.2010 19:16

[FIXED]   webaccessor: modified m_data2 handling, so that sort order is always preserved as received by webservice
[ADDED]   request.h: added a m_data2 list as in Accessor, others can now retreive resources in the requested order
[CHANGED] sync: use Request::dataList() to get data ordered by created_at+id
[ADDED]   timeline: show Euroscan temperature data if a system owns such a device;
           show toolTips with standing times between the travels
[CHANGED] timeline,restingview,mainwindow: show timeline/restingview even if system is not selected for sync
[UPDATED] --> beta 6.9

R935 | 16.12.2010 18:10

[FIXED] garmin destinations can be added in the future; naive fix - have to be evluated
[CHANGED] drivelogtable stuff

R934 | 15.12.2010 18:30

[ADDED] tab in systems for drive log and basic tablemodel for the drives - wip
[CHANGED] driverlog commit dialog - wip

R933 | 15.12.2010 17:02

[ADDED] license plate to system dialog window title
[ADDED] license plate to system at archiv/travel print
[ADDED] calender popup in garmin messages
[CHANGED] driverLog activated on seperate coworker tab

R932 | 14.12.2010 18:56

[CHANGED] forgot to hide filter column

R931 | 14.12.2010 17:54

[ADDED] all new and shiny coworker travels; completely rewritten and fast as hell :) jokes aside, 
        let me now how they work for you; update on sync finish yet missing though
[ADDED] customerChangedStarted/Finished signals, they should be used instead of customerFilterBoxChanged 
        which is emitted after old customer is deloaded and before new customer is loaded

R930 | 14.12.2010 17:22

[FIXED]   travelreport,archivereport: sorting by date was done by string comparison. now the actual QDateTime is used.
[UPDATED] travelreport: speedup by avoiding QMap::values(). Using a QMap::const_iterator where possible
[CHANGED] icons for GarminMessage direction: replaced the key by a house.
[CHANGED] garminmessagetablemodel: for message type, show icons. Type description is now in ToolTip.
[ADDED]   icons for GarminMessage type "OK" (exclamation mark) and "YES_NO" (question mark).
[UPDATED] --> beta 6.6

R929 | 10.12.2010 17:37

[FIXED] travelvisualizer: when selecting/unselecting travels in SystemTimeline, we have to check drawn
        travels, even if the Timeline was rebuilt (e.g. by changing the day or when sync ran over the system)
        and the original STTravels don't exist anymore.
        For this, we pass the System resource and the drive number to the STTravel object and check them if
        we didn't find the exact STTravel object. Without that, unselecting shown travels didn't work after
        day change. Now it does.
[ADDED] ConfigWindow, GenericWindows: Added config option "show tool bar" to show/hide toolBar in resource
        windows (default: hide).
[UPDATED] --> beta 6.5

R928 | 10.12.2010 15:12

[CHANGED] timer intervall for blinking to be not so heavy on cpu
[CHANGED] commented connection for showAllSystems on customerChanged as this is handled by add and remove
          and caused double loading of systemviews; Alex plz check that i didnt break something

R927 | 09.12.2010 16:49

[CHANGED] timekeepingstuff corrected; added work duration in table when current day; corrected sorting 

R926 | 08.12.2010 18:51

[CHANGED] improved travel visualization in coworker dialog - wip, still very slow on large data like fleckSchleipen

R925 | 08.12.2010 17:52

[CHANGED] positionsync,sqlaccessor: further sql optimization
[ADDED]   definitions.h/cpp: added Timekeeping status description texts and icons - can now be
          accessed at a central place
[ADDED]   coworkertablemodel: show each Coworker's last timekeeping event
[CHANGED] coworker: preload 1 month of timekeepings at postCreate(); reactivated from/to params;
          fixed timekeepings() function
[UPDATED] --> beta 6.4

R924 | 07.12.2010 18:59

[CHANGED] drivelog dialog

R923 | 07.12.2010 17:22

[FIXED]   SystemTimeline: speeding visualization when day's max speed was 0 km/h
[CHANGED] SystemView: minor layout things; show timestamp for Euroscan data
[FIXED]   GenericWindow: text in message box when deleting a resource
[CHANGED] Errorbox: hide empty labels makes ui look nicer

R922 | 07.12.2010 15:23

[CHANGED] ErrorBox: fixed layout; made text field readonly
[UPDATED] ConfigWindow: redesigned layout                                      
[FIXED]   ConfigForm/-Window: preview for opacity of non-selected systems was empty at startup
[FIXED]   CoworkerForm: require coworker to have a non-empty name when it's going to be saved
[FIXED]   translation typos
[UPDATED] --> beta 6.3

R921 | 07.12.2010 11:56

[CHANGED] travel to driverlog

R920 | 07.12.2010 11:34

[CHANGED] travel dialog

R919 | 03.12.2010 18:37

[CHANGED] SystemView: layout (speed left of timestamp, doors left of temp)
[CHANGED] SystemTableModel: show timestamp always with date
[FIXED]   SystemTimeline: travels react from y=0px for clicks and mouseover
[CHANGED] RestingView: layout, line colors;
          Fixed: hide widget when timeline is hidden, load new system when selection changes
[FIXED]   TravelReport: driving time calculation with new constraints (according to Timeline)
[FIXED]   GenericWindow,resourcewindows: resources were deleted, regardless of answer to confirmation dialogue
[UPDATED] --> beta 6.2

R918 | 02.12.2010 17:51

[ADDED] new dialog for editing open travels (for travel book functionality) - viewable for now in coworkerwindow
[CHANGED] simple travel view in timekeepings has now better higlighting and hover effect
[CHANGED] started some caching in simple travelmodel - wip

R917 | 01.12.2010 19:06

[ADDED] RestingView: calculate and show working times. Displaying resting times or working times
         is selectable through ui.
         Always show last 7 days until selected date (old from-monday-behaviour is still in code,
         can be made user configurable if desirable).
[CHANGED] some layout things
[CHANGED] on many places in ui where timestamps are shown: if shown date is today, print only the time.
[UPDATE]  --> beta 6.1

R916 | 01.12.2010 13:10

[FIXED] worktimereport

R915 | 30.11.2010 19:03

[CHANGED] put RestingView out of SystemTimeline into TimelineControl. Does not cover timeline anymore.

R914 | 30.11.2010 18:55

[CHANGED] timekeeping updateintervall to 120secs
[CHANGED] moved changed signal behind postCreate/Load
[FIXED] some garmin destinations bugs

R913 | 30.11.2010 16:11

[CHANGED] Added index to local position db for combined (status,speed,timestamp)-Queries.
          SystemTimeline will be ~200% faster after next sync.

R912 | 30.11.2010 12:50

[FIXED] bug allowing empty garmin messages; at least one char is now needed to activate send button

R911 | 26.11.2010 18:47

[UPDATED] embedded resting view in display graphic

R910 | 25.11.2010 18:34

[CHANGED] notify blink is now fading icon instead of inverted icon; config change should now correctly update icons

R909 | 24.11.2010 20:49

[FIXED]   K02 crash
[CHANGED] mainwindow layout, systemtimeline: put timeline in a floatable QDockWidget
[CHANGED] mainwindow: show name of selected System in title
[ADDED]   system: added webservice fields 'start-private' and 'last-private'
[UPDATED] systemview: don't show position text when positions are private
[FIXED]   colorpicker: update selected color right after closing the dialog  
[UPDATED] --> beta 5.17

R908 | 23.11.2010 18:09

[CHANGED] systemtimeline,timelinecontrol: layout; timelinecontrol got a label for resting/driving summary;
          removed text "no positions available" - System's sync state is now intelligently guessed by user
[FIXED]   systemview: correctly hide/show timestamp and speed in title when expanding/collapsing
[FIXED]   coworkerwindow: weekly tk report crashed when no coworker was selected

R907 | 23.11.2010 13:32

[CHANGED] little monthly tk report adaption

R906 | 20.11.2010 20:24

[ADDED] working config entries for blink, spin and notify period

R905 | 19.11.2010 19:25

[CHANGED] system timeline: splitted navigation stuff into an external controller widget (TimelineController).
          we can concentrate on viewing data and don't have to care about drawing fiddly buttons.
[ADDED]   button images for TimelineController
[CHANGED] systemtablemodel: added system type to "version" column
[UPDATED] --> beta 5.15

R904 | 18.11.2010 22:26

[CHANGED] some cleanup in garmin messages i forgot - should be considerably faster now on large amounts of data

R903 | 18.11.2010 19:18

[UPDATED] polished garmin messages; added icons for direction

R902 | 17.11.2010 18:39

[CHANGED] garmin message stuff
[ADDED] system view blink for evaluating purpose
[FIXED] some mem leaks on customer change
[ADDED] config entries for blink - wip

R901 | 17.11.2010 17:57

[FIXED] travel report: show map text for single positions
[FIXED] map: when system status changes, change label color immediately
[UPDATED] --> beta 5.13

R900 | 17.11.2010 16:39

[CHANGED] mainwindow: optimized system selection
[FIXED]   providers, devicetypes, fueltypes are loaded properly
[ADDED]   own resource classes for: providers.h, devicetypes.h, fueltypes.h
[REMOVED] constant.h

R899 | 16.11.2010 19:11

[UPDATED] further acceleration for systemtimeline
[FIXED]   resting view: show correct time for each single day (resting times that go over more days are
          cumulated from one to another)
[FIXED]   typo in translation

R898 | 16.11.2010 15:21

[FIXED]   crash bug at resource save and deletion
[UPDATED] map: accelerated highlight change --> faster system change in main window
[FIXED]   webaccessor: call resources' postLoad() slot (Systems didn't lookup Garmins at startup)
[CHANGED] sync: removed status messages "waiting for webservice" and download progress; set limit to 1000

R897 | 14.11.2010 13:16

[CHANGED] remade coworker travels - working like a breeze :)
[CHANGED] some cleanups customerchange restructuring
[ADDED] get/set system name and driver name in travelitem but they must be set externally

R896 | 13.11.2010 12:53

[FIXED] travels in coworker dialog - WIP

R894/R895 | 12.11.2010 19:45

[CHANGED] sync/mainwindow: moved status messages around
[UPDATED] --> beta 5.10

R893 | 12.11.2010 18:42

[FIXED]   sync crashed; leaving its accessor in sync thread (also keeps ui fluid)
[CHANGED] resourcepool: systems() without global list
[ADDED]   webaccessor: added parameter "dont_handle_deletions" (not appended to url, but prevents deletion
          even if updated-since is not set)
[CHANGED] moved User-Agent header to WebHelper (static)

R892 | 12.11.2010 12:49

[CHANGED] WIP

R891 | 10.11.2010 21:50

[CHANGED] basic spinning - time hardcoded to 1 hour for now

R890 | 10.11.2010 21:40

[ADDED] basic spinning - not yet corellated to last status time

R889 | 10.11.2010 18:57

[UPDATED] --> beta 5.9

R888 | 10.11.2010 18:56

[FIXED]   Sync: crash-bug
[CHANGED] RestingView: don't translate "h","m"

R887 | 10.11.2010 18:34

[CHANGED] working on speedup; added qlist in webaccessor to prevent massive call of qmap.values() - WARNING WIP
[CHANGED] commented splitter geometry & state save as temporary splitter fix - shoul be sufficent for now
[CHANGED] configure dialog layout to better fit small screens

R886 | 10.11.2010 17:44

[UPDATED] location signal handling for map (same as with Systems)
[FIXED]   SystemWindow -> reports: init models with current System when changing tabs
[FIXED]   StatusWidget: sort systems by name
[FIXED]   Sync: start automatically when MainWindow is set up and sync ist enabled in config

R885 | 09.11.2010 13:06

[CHANGED] fine tuned System update for map and SystemView

R884 | 09.11.2010 18:00

[CHANGED] working on speedup; some inital tests with customer - WARNING WIP

R883 | 09.11.2010 16:13

[CHANGED] connected olmap, olsystem & systemview to systemAcc changed signal - this is temporary -> Alex please
          look into it
[ADDED] setWebAcc() to AutoTimerClock. This widget now shows elapsed time of set accessor. StatusWidget cloack
        is now connected to systemAcc

R882 | 09.11.2010 10:42

wip

R881 | 05.11.2010 16:01

[UPDATED] positionsync now more verbose and shows total number of positions to be fetched
[CHANGED] Sync: fetch-limit --> 10000

R880 | 04.11.2010 21:17

[CHANGED] some coworker stuff
[ADDED] temporarily debug stuff in config window for the download thingy to test for rob - accept-encoding set to
        identity for getting download size

R879 | 04.11.2010 18:25

[UPDATED] a lot of coworker timekeeping fixed - still wip
[CHANGED] webaccessor on save create not emitting change anymore - might be discussable

R878 | 03.11.2010 19:12

[CHANGED] layout stuff
[UPDATED] timekeepings load process with new resources - wip

R877 | 03.11.2010 14:53

[CHANGED] lots of layout stuff; AT THIS POINT YOU SHOULD REALLY RESET YOUR LAYOUT OR  ELSE BEHAVIOUR IS UNDEFINED

R876 | 02.11.2010 20:12

[CHANGED] customerchange should work now

R875 | 02.11.2010 17:01

[ADDED] lots of debug for customerchange 

R874 | 02.11.2010 16:55

[CHANGED] SqlAccessor: resolved "database still in use" problem, removed debug messages

R873 | 02.11.2010 15:33

[UPDATED] RestingView: weekly overview of resting times (located in SystemTimeline)
[FIXED]   SystemTimeline height/spacer issue
[ADDED]   config.h: some defines for driving speeds (standing: 0..2 km/h; slow: 3..15 km/h)

R872 | 01.11.2010 17:17

[CHANGED] some reourcepool cleanup
[ADDED] errorbox to webaccessor
[CHANGED] customerFilterChange behaviour - still wip

R871 | 29.10.2010 18:02

[FIXED] SqlHelper wasn't caused to quit anymore..
[UPDATED] map stuff resource handling clean (mainly OLSystem and OLLocation)

R870 | 29.10.2010 15:23

[CHANGED] fixed SqlAccessor deletion; duplicate connections to FuelTableModel

R869 | 29.10.2010 15:03

[ADDED] Traffic section to config window

R868 | 29.10.2010 14:21

[FIXED] basic save/delete in system
[FIXED] garmin messages - destinations yet todo
[CHANGED] generic window resource list resizing - have to be watched if it works

R867 | 28.10.2010 14:43

[FIXED] bug on creating new event

R866 | 27.10.2010 21:38

[FIXED] line i forgot to comment

R865 | 27.10.2010 20:38

[FIXED] event dialog should now work as intended

R864 | 27.10.2010 19:46

[CHANGED] combined fuel report through own Accessor (to be updated when cached accessor is ready)
[CHANGED] System->refuelings: increased update interval from 10sec to 5min ;)
[CHANGED] fixed pause times in SystemTimeline, added mouseover with start/stop times of pausings

R863 | 26.10.2010 20:31

[CHANGED] group member handling rewritten  (member-uuid-fields in Group resource to be implemented in webservice)

R862 | 26.10.2010 20:08

[MERGE] new resource system

changes to rs2 branch:

R861 | 26.10.2010 19:43

event wip

R860 | 26.10.2010 17:31

SystemCommands (reading and submitting) through webaccessor

R859 | 26.10.2010 12:17

wip

R858 | 25.10.2010 22:38

create/edit/destroy for event (groups did in commit before)
observers are todo as well as group memberships which will be redesigned

R857 | 25.10.2010 21:54

rename from advice to event

R856 | 25.10.2010 19:46

create/edit/destroy for coworker/customer update
fixed bug in autoDelete

R855 | 25.10.2010 18:58

create/edit/destroy for garmin/location/trailer update
static member receivedBytes in webhelper added to sum all received bytes, can be handy for statistics

R854 | 24.10.2010 19:58

cleaned a bit in ResourcePool
removed all occurences of resourceloader 

R853 | 23.10.2010 16:11

geocoder accessor added in resource pool

R852 | 22.10.2010 19:57

system: refueling handling incl. adding, deleting, changing; single-system fuel report clean
webaccessor: resources that shall be destroyed now instantly disappear from the list
accessor: new method "getLocalSorted()" to get data sorted by an arbitrary attribute

R851 | 22.10.2010 13:47

added changed signal for save-created res's

R850 | 21.10.2010 18:24

started garmins
other stuff i dont remember :)

R849 | 21.10.2010 07:39

removed the old tests (map24 and the first model test ;))

R848 | 20.10.2010 23:21

resource stuff; experimental new, delete, save in userdialog all going through the accessors; commented lots of
  stuff which is probably not needed anymore 

R847 | 20.10.2010 18:40

system: load euroscan/canbus/trailer data by WebAccessor

R846 | 20.10.2010 16:04

customer selection basics
removed some duplicate connections

R845 | 19.10.2010 18:12

selection bug

R844 | 19.10.2010 17:53

resource stuff

R843 | 19.10.2010 17:21

[FIXED]   PositionSync: crash due to different threads and when explicitly deleting Positions (resetting PPosition
          pointer instead)
[CHANGED] WebAccessor:
          - call 'netReply->deleteLater()' rather than 'delete netReply' to make it work for different threads
          - print debug messages before emitting signals

R842 | 19.10.2010 10:35

[FIXED] a stack overflow (endless recursion)

R841 | 18.10.2010 19:59

updated positionSync to use own WebAccessor
changed WebAccessor: added parameter to set key for QMap (not all Resources have a uuid)

R840 | 18.10.2010 18:21

wip

R839 | 18.10.2010 17:19

connection corrections, fixed sql access, travel report clean

R838 | 18.10.2010 15:50

timekeepings are shown

R837 | 18.10.2010 13:07

wip

R836 | 17.10.2010 21:14

coworker stuff

R835 | 17.10.2010 20:24

wip

R834 | 16.10.2010 18:11

lots of resource stuff; m_id was not set - removed it and id() now returns get("uuid")
for now am keeping the mass of debugging output in code

R833 | 16.10.2010 15:50

lots of resource stuff - it seems signal/slot param name have to be consistent (PResource != QPtr<Resource>)

R832 | 16.10.2010 02:26

resource stuff

R831 | 15.10.2010 20:11

[UPDATED] resource table models, GenericWindow, ResourceComboBoxes, PositionSync, reports

R830 | 15.10.2010 17:30

trailer stuff

R829 | 14.10.2010 17:50

[UPDATED] statuswidget, systemview: clean
[UPDATED] system: rs2 support for some members

R828 | 14.10.2010 17:31

lots of QPtr changes and .data() adding - needs to be carefully checked later

R827 | 14.10.2010 16:21

customer stuff

R826 | 14.10.2010 15:33

resource* to qptrs in resourcecomboboxes

R825 | 13.10.2010 18:19

changed resource handling
accessor resource signals are now QPtr too
experimental changed emitting from resource itself with QPtr<this> dont know if this is good :) needs to be
  discussed imho
resource inherits QSharedData  now

R824 | 13.10.2010 15:52

[UPDATED] travel report: use System's position accessor
[CHANGED] accessor/request: store data in a QMap (reports need sorted results)
[REMOVED] qmapcontrol API, osmmap/osmmapwindow
[REMOVED] devwindow

R823 | 12.10.2010 18:38

[ADDED] resource signals in web accessor... 
        basically working but still lots of TODOs

R822 | 12.10.2010 17:23

statusbar login

R821 | 12.10.2010 16:37

[FIXED] reauth

R820 | 12.10.2010 16:16

[FIXED] . to ->

R819 | 12.10.2010 15:53

wip

R818 | 12.10.2010 14:34

[ADDED] webaccessor, start and stop auto update

R817 | 12.10.2010 13:15

[FIXED] layout of login window for mac os
[FIXED] failed authentication 

R816 | 11.10.2010 19:34

[CHANGED] converted some of ResourcePool's loaders to WebAccessors

R815 | 11.10.2010 15:12

[ADDED] area calculation for locations  (also done in trunk)

R814 | 07.10.2010 20:47

[ADDED] SQL Accessor (threaded)

R813 | 07.10.2010 19:54

loginwindow partly remade, not yet finished

R812 | 07.10.2010 19:04

moved authentication logic to webhelper.cpp (only once per app, not per accessor)
moved update/reload logic to webaccessor (out of webaccessorqobject)

R811 | 07.10.2010 18:18

reauthenticating on error...

R810 | 07.10.2010 16:23

auth state as static in webaccessor, not global

R809 | 07.10.2010 15:36

blub

R808 | 07.10.2010 15:22

find, findfirst

R807 | 07.10.2010 14:58

external deletion

R806 | 07.10.2010 14:25

updated since

R805 | 07.10.2010 14:01

;)

R804 | 07.10.2010 13:58

dub di dub

R803 | 06.10.2010 18:01

cleanup

R802 | 06.10.2010 17:42

foo

R801 | 06.10.2010 17:27

request ptr in slot
some other fixes :)

R800 | 06.10.2010 16:28

delete

R799 | 06.10.2010 15:01

blub

R798 | 06.10.2010 14:32

wip ;)

R797 | 06.10.2010 14:08

wip

R796 | 05.10.2010 20:10

small fix for getting uuid from childnode

R795 | 05.10.2010 18:49

wip

R794 | 05.10.2010 17:37

[ADDED] first web access working

R793 | 05.10.2010 16:45

[ADDED] some new resource foo

R792 | 05.10.2010 12:13

[ADDED] branches/rs2_jetzt_aber_richtig

end of changes to rs2 branch

R791 | 04.10.2010 15:14

[CHANGED] http connection keep alive

R790 | 01.10.2010 20:29

[FIXED] segfault: system commands were created and then quickly deleted ;)

R789 | 01.10.2010 19:06

[CHANGED] system form / system:  sending system commands currently allows only one command at a time

R788 | 01.10.2010 17:11

[CHANGED] Language files updated

R787 | 30.09.2010 18:57

[ADDED] image "course green/yellow" (slow driving)
[ADDED] travel visualizer: visualize holding (speed <= 2 km/h) and slow driving (2 < speed <= 15)
[ADDED] system view: support FMS3 data
[FIXED] system: canbus and euroscan data were updated only when system changed (now loaded on
        ResourcePool's autoupdate)
[ADDED] resource pool: send a signal when autoupdate happens, so resources can update their own stuff
[FIXED] ollabel: possible memleak
[FIXED] position sync: in progress message, hide empty brackets when current system has no license plate
[CHANGED] system view: moved io group to bottom

R786 | 30.09.2010 14:37

[REMOVED] position sync code from SystemWindow (lives in MainWindow since a while ago)
[FIXED]   from/to tooltips in SystemTimeline
[ADDED]   map: permanent labels for single travel positions (created/removed by click on position)
[UPDATED] --> beta 4.14

R785 | 29.09.2010 19:17

[ADDED] basic axis to can data 
[CHANGED] extended state reverted on exit

R784 | 29.09.2010 15:35

[UPDATED] can data; all data is now available; scaled too fit the window
[CHANGED] commented some debug logs - its getting too much :)

R783 | 29.09.2010 15:28

[CHANGED] Language files updated

R782 | 29.09.2010 15:10

[CHANGED] Language files updated

R781 | 29.09.2010 14:43

[CHANGED] Language files updated (source code if necessary corrected)

R780 | 28.09.2010 17:40

[ADDED] map: generic toolTip handling for OLDrawable; toolTips for systems;
        toolTips for single travel positions
[FIXED] travel item: always provide positions in order, sorted by timestamp.
        Assures that they are drawn in order on map.
[CHANGED] system window/table: swapped columns "reject"/"connected"
[CHANGED] system timeline/main window: hide button "clear travels" when the last travel is toggled off
[UPDATED] --> beta 4.13

R779 | 27.09.2010 17:00

[FIXED]   position sync: encoding error in a rare request; eliminated "db in use" warnings
[CHANGED] system window: disabled search dialog for now (often times out and throws http proxy errors)
[CHANGED] map: prepared labels for travel positions (to be continued)
[ADDED]   system window/table: new columns "reject connection" and "connected"
[UPDATED] --> beta 4.12

R778 | 24.09.2010 13:55

[FIXED]   system timeline: force updating calendar's parent widget when calendar is shown (windoze bug)
[UPDATED] --> beta 4.11

R777 | 24.09.2010 13:13

[CHANGED] system timeline: calendar handling

R776 | 23.09.2010 19:32

[CHANGED] generic reports, travel report:  date selectors: make sure 'from' is before 'to'
[UPDATED] status codes (definitions.cpp)
[ADDED]   image for solar plant status

R775 | 23.09.2010 17:31

[UPDATED] CAN stuff - enabled values which have reasonable values; still much to do

R774 | 23.09.2010 16:39

[FIXED] main window: hide whole timeline container when system is not synced
[FIXED] system timeline: place calendar below date field if it fits there (else above it)
[UPDATED] --> beta 4.10

R773 | 23.09.2010 15:41

[FIXED] system timeline: layout things; calendar was drawn in nirvana
[FIXED] main window: connection to "clear travels" button was lost

R772 | 23.09.2010 14:40

[CHANGED] added remaining color and check connections

R771 | 22.09.2010 20:09

[ADDED] colorpicker widget
[ADDED] more functionality to can data visualization

R770 | 22.09.2010 13:42

[ADDED] stcan.h corresponding to sttravel.h
[REMOVED] systemtimeline.ui
[UPDATED] systemtimeline for first basic can drawing

R769 | 21.09.2010 18:12

[FIXED] more precision placing things on map
[ADDED] config window: enable/disable SystemTimeline

R768 | 20.09.2010 18:56

[CHANGED] added splitter between map window and timeline for easy sizing
[CHANGED] up/down button depending on timeline extended/unExtended

R767 | 20.09.2010 18:43

[CHANGED] error box: print entire text when no error code is found
[FIXED]   search dialog: don't try to parse data if request fails - resend request

R766 | 20.09.2010 16:37

[CHANGED] location window map:  enable moving/dragging only for currently selected location;
          highlight selected location in map, apply transparency to others;  when jumping to
          polygon locations, go to first polygon coord, instead of worldX/worldY.
[CHANGED] location form:  visualize type (radius/polygon)
[CHANGED] statuswidget:  layout cleanup
[FIXED]   system timeline:  tool tip showed travel start text for travel stop

R765 | 20.09.2010 16:10

[CHANGED] layout of systemtimeline - lies now directly inside the mainwindow mapdock
[CHANGED] speed factor gets calculated so that the graph is as high as the widget minus maxspeedline; this is
          needed for if i extend the timeline

R764 | 20.09.2010 13:08

[FIXED] build broken by r763
[CHANGED] system extension types: removed "external" from "GPS device"

R763 | 17.09.2010 17:43

[CHANGED] system timeline: layout changes; dynamic internal layout handling; removed "working time" from tool tips
[ADDED]   resting view: stub of a widget to show resting times for all days of a week
[UPDATED] --> beta 4.9

R762 | 15.09.2010 19:16

[ADDED] button in system timeline next to zoom buttons for showing extended can data

R761 | 15.09.2010 18:21

[CHANGED] system timeline: worktime calculation of previous day now looks for last travel stop;
          6px margin at the left; made date changer buttons bigger
[FIXED]   map/olcurvestring: new formula to prevent curls at large timestamp distances (tested <=5min);
          changed default color to blue
[FIXED]   main window: when a travel is shown, stop following the selected system
[FIXED]   statuswidget,map,systems: instantly update label of selected system

R760 | 15.09.2010 16:30

[CHANGED] removed mainwindow menu and added reset layout button below update clock

R759 | 15.09.2010 15:03

[FIXED] standing time of last travel was calculated against current date and not the date set by user

R758 | 15.09.2010 14:00

[FIXED] LoginWindow cutting some usernames/passwds

R757 | 14.09.2010 18:50

[CHANGED] system timeline:  added button "daily view"; added tool tips with button explanations;
          blue background rectangle height now represents driven max speed (not user defined speed limit);
          dragging timeline even when clicking on a travel and then moving mouse;
          travels on map are now toggled (on/off) and not cleared automatically;
          don't show position texts of private travels
[CHANGED] travel visualizer:  remember shown travels; positions exceeding speed limit are red
[ADDED]   config window, map:  transparency of non-selected systems is user-definable
[ADDED]   config window, system view:  show/hide CAN FMS1 axle weights (default: hidden)
[ADDED]   graphic files for demonstrating transparency value in config window
[CHANGED] map/olcurvestring:  calculate average position timestamp difference for control points
[CHANGED] main window:  "clear travels" button layout
[UPDATED] --> beta 4.8

R756 | 13.09.2010 19:36

[ADDED] system timeline, travel visualizer: click on a travel shows it on map;
        changing cursors indicate dragging/clicking features
[CHANGED] error box: also show something useful if error message is not generated by
          webservice (HTTP proxy errors for example)
[CHANGED] system timeline: work time calculation: time between pause and driving position
          now counts as working time
[CHANGED] olmap now owns exactly one TravelVisualizer, offered publicly for others to draw
          their travels
[FIXED] travel report: column mismatch in speed of expanded positions; travel starttime
        still had no secs
[FIXED] system view: put power into IO group again (wasn't hidden by "IO" checkbox)

R755 | 09.09.2010 18:35

[FIXED] system view: spacing problem at bottom; "power" was calculated only for sys types FIRST and ALL
[ADDED] system timeline:  mapping mouse position to single travels; show tool tips with infos to hovered travel;
        different colors for different travels
[ADDED] map/OLDrawable: property highlightState (Foreground, Background, Default)
[CHANGED] OLSystem (systems on map): when a system is selected, make all others transparent
[UPDATED] --> beta 4.6

R754 | 08.09.2010 18:30

[ADDED] system timeline: calculate and show resting time (from previous driving position
        to first position of shown day)

R753 | 08.09.2010 17:28

[CHANGED] system timeline: layout; added calculation of resting times (15/30/45 min)
[FIXED] accessing deleted resources after customer change
[FIXED] main window: map was not aligned at the right end
[UPDATED] --> beta 4.5

R752 | 07.09.2010 18:11

[CHANGED] system view: IO field to bottom; timestamp in title disappeared though "show now" wasn't set
[ADDED] resource windows: show name of current resource in window title
[ADDED] resource: name() is now a member of Resource (resources that have no name tag, can redirect it)
[FIXED] Trailer crashed when attempting to load trailer_data for local Trailers
[FIXED] travel report: seconds in start/stop times were missing; don't show stop time for running travel
[UPDATED] --> beta 4.4

R751 | 06.09.2010 18:14

[UPDATED] --> beta 4.3 (no debug.log)

R750 | 06.09.2010 18:00

[CHANGED] position sync: place resource loaders into QNetworkManager's thread
[FIXED] system timeline: travel end detection

R749 | 06.09.2010 15:16

[FIXED] system timeline: in calendar, first day of week is monday
[CHANGED] system timeline: show working time instead of driving/holding
[FIXED] travel report: blur in working time calculation

R748 | 02.09.2010 18:53

[FIXED] system timeline: layout stuff
[ADDED] system timeline: calendar widget, opened by clicking on the date

R747 | 02.09.2010 18:50

[FIXED] printing archiv and travelreport now respects hidden columns

R746 | 02.09.2010 17:20

[FIXED] travel/coworker assigning should now also work with MAE ids

R745 | 02.09.2010 14:52

[FIXED] ErrorBox should appear again

R744 | 02.09.2010 13:44

[FIXED] memory leak in network handling
[FIXED] updated_since wasn't set early enough when big lists had to be processed

R743 | 01.09.2010 19:23

[CHANGED] statuswidget appearance - made room for layout reset button
[CHANGED] moved extensions from configuration to status

R742 | 31.08.2010 18:35

[ADDED] system name and license plate to travel report next to times

R741 | 31.08.2010 18:14

[UPDATED] switched to QNetworkAccessManager, hopefully fixed proxy problems

R740 | 31.08.2010 18:09

[CHANGED] all printing replaced by pdf'ing (archiv, sensor, fuel, timekeeping, travels etc.)
[CHANGED] made line on status widget besides update clock longer

R739 | 31.08.2010 14:38

[FIXED] travel report: corrected totals of working time when "cumulate times" is enabled
[UPDATED] --> beta 4.1

R738 | 30.08.2010 18:35

[ADDED] systemtimeline: day is changeable; added quarter hour bars
[ADDED] statuswidget: button "expand all / collapse all"
[FIXED] event window: notified-at UTC->local
[CHANGED] login window: load customers only when terms have to be signed
[CHANGED] travel report: calculate working times properly

R737 | 27.08.2010 18:47

[ADDED] travel report: show total working time below table
[FIXED] travel report, archive report: the initial column problem

R736 | 27.08.2010 17:30

[CHANGED] Language files updated

R735 | 27.08.2010 17:08

[ADDED] TravelReport: working times (driving times without holding)
[ADDED] configWindow: check boxes for controlling travel report
[FIXED] ArchiveReport: hidden columns were not hidden at startup
[CHANGED] SystemView: batt/power only shown for system types "FIRST" and "ALL"

R734 | 27.08.2010 16:18

[CHANGED] Language files updated (source code if necessary corrected)

R733 | 27.08.2010 14:11

[CHANGED] System/SystemForm: renamed Port1..4 to Port0..3
[ADDED] Login: check for Customer->disabled() and reject login if set
        (nice idea, but user's customer is never visible to user :\ Feature disabled for now)
[CHANGED] some layout things
[UPDATED] --> beta 4.0

R732 | 26.08.2010 17:59

[CHANGED] httpxml: user-agent: "OSC3/3.0BETA3.10" --> "OSCpc/BETA3.10"
[CHANGED] mainwindow: access to resetWindow(): removed button, added a menu entry

R731 | 26.08.2010 17:58

[ADDED] basic support for config changes

R730 | 26.08.2010 16:30

[FIXED] Resource: QHttp calls requestFinished() on setHost(). Led to HTTP error messages,
        since there's no response at this time. Now we check for valid response.
[ADDED] MainWindow and other windows: Remember initial geometry/state settings; user can
        restore them if he scrambles his UI:
         - GenericWindow: MenuBar->Window->Restore layout
         - MainWindow: tiny button far right in "Tools" dock
[ADDED] ConfigWindow: button "Restore defaults" clears entire application config (including
        proxy settings, sync state, window layout etc.)

R729 | 25.08.2010 17:08

[ADDED] System: recognize types of attached external devices (preliminary taken from systems.xml->status->DI)
[CHANGED] System, SystemView: Load external devices data only if such a device is attached
[ADDED] ExtensionComboBox: drop down box for external device types
[FIXED] Trailer: broken connection

R728 | 23.08.2010 18:07

[ADDED] system window: new "configuration" tab for configuring system settings (heartbeat, powersave etc.)
[ADDED] System: prepared fields for system config; setting some default values in constructor for new Systems
[CHANGED] renamed old "configuration" tab to "master data" (de: "Stammdaten")
[FIXED] system view: expand button was not set when auto-expanding at startup

R727 | 19.08.2010 20:48

[CHANGED] visibility of current selected system
[FIXED] printing of reports should be looking good across page borders 

R726 | 19.08.2010 18:20

[UPDATED] providing proxy-user/-password for proxy authentication
[FIXED] column hiding in archive report was broken

R725 | 19.08.2010 16:19

[ADDED] application wide proxy support

R724 | 18.08.2010 18:34

[CHANGED] 3.9 -> 3.10
[CHANGED] generic report date widgets from QDateEdit to QDateTimeEdit (this is for the archiv being able to select
          timespan better than days)
[CHANGED] selected system gets special design on the map to be better distinguishable
[ADDED] pdf print in timekeepings and system ArchiveModel
[ADDED] util.h/cpp for some general stuff (printing & csv in this case)

R723 | 11.08.2010 19:30

[FIXED] missing positions column in timekeeping print
[ADDED] csv export in timekeeping report
[UPDATED] trailer archive with ability to look for a certain time period

R722 | 11.08.2010 16:09

[CHANGED] reverted proxy change :( Didn't work with HTTP proxies (but worked for SOCKS5).

R721 | 11.08.2010 14:03

[CHANGED] statuswidget: check box "CAN-bus 2" visible again
[UPDATED] --> beta 3.8

R720 | 11.08.2010 14:00

[CHANGED] proxy settings apply application wide (also to map's QWebView)
[ADDED] CAN-bus FMS2 support
[ADDED] CAN-bus FMS3 support

R719 | 10.08.2010 21:25

[ADDED] user can be bound to specific MAC address which is checked at login

R718 | 09.08.2010 17:44

[ADDED] systemview: remember collapsed/expanded state
[FIXED] statuswidget: settings needed during runtime were written first at application shutdown
[CHANGED] canbus data parsing
[CHANGED] main window title: added string "- Version"
[CHANGED] archivereport: cleanup
[CHANGED] statuswidget: check box "Can 2" hidden for now

R717 | 09.08.2010 14:04

[FIXED] CanBus update
[FIXED] systemview: destination position was shown even when checkbox was disabled
[ADDED] HTTP requests send login name within user-agent for statistical purposes
[ADDED] mainwindow: window title shows version
[FIXED] trailerdatamodel: broken connection
[UPDATED] --> beta 3.7

R716 | 05.08.2010 17:29

[ADDED] CAN-Bus FMS4 support
[CHANGED] CanFms object handling
[UPDATED] --> beta 3.6

R715 | 04.08.2010 18:22

[ADDED] CAN-Bus/FMS1 support
[CHANGED] systemview: when expanded, move speed to group "now" and hide speed and timestamp in title
[UPDATED] --> beta 3.5

R714 | 04.08.2010 16:55

[ADDED] garmin message table is sortable
[ADDED] set login button in loggin window to default

R713 | 04.08.2010 15:59

[ADDED] last login is saved
[ADDED] passwd can be remembered (pass gets encrypted and is saved in registry)

R712 | 03.08.2010 19:10

[FIXED] trailerdatareport: timestamp utc->localtime
[UPDATED] --> beta 3.4

R711 | 03.08.2010 18:52

[ADDED] generously added also some of the new files ;)

R710 | 03.08.2010 18:47

[ADDED] trailer window: trailer data report (last 20 positions)
[ADDED] config define: TRAILERDATA_LIMIT (20 for now)

R709 | 03.08.2010 17:43

[FIXED] bug with travelreport crashing while switching coworkers
[FIXED] some failed init due to missing Coworker
[FIXED] some rare bug with doorLoader in system, might not be fixed yet

R708 | 03.08.2010 13:58

[FIXED] map/locations: error when trying to draw circles before map is loaded
[ADDED] systemview: when trailer position is shown as location name, the original map-text is given in toolTip

R707 | 02.08.2010 18:22

[CHANGED] systemview: layout
[ADDED] section order in nearly all tables are preserved over application restart
[ADDED] configwindow: more check boxes to show/hide sections in archivereport
[CHANGED] archivemodel: if position text is hidden, then don't resolve location texts
[UPDATED] --> beta 3.3

R706 | 30.07.2010 19:05

[FIXED] system view: empty space before IOs

R705 | 30.07.2010 17:15

[CHANGED] Language files updated (source code if necessary corrected)

R704 | 30.07.2010 16:41

[FIXED] position sync crash (caused by debug output)

R703 | 30.07.2010 16:01

[CHANGED] system view/trailers: layout
[CHANGED] system: position loading now uses Position class
[ADDED] map: facility to raise items above others (e.g. when a System is selected)
[CHANGED] map/olsystem: label format changed to "systemname (licenseplate)"
[UPDATED] --> beta 3.2

R702 | 30.07.2010 13:05

[FIXED] travelreport ui

R701 | 30.07.2010 12:55

[FIXED] travelreport ui

R700 | 30.07.2010 12:40

[ADDED] travelreport ui

R699 | 29.07.2010 19:34

[CHANGED] system view: layout changes, added expanded trailer info
[ADDED] system: remember last trailer positions

R698 | 29.07.2010 18:47

[CHANGED] travelreport ui to be standalone (!generic report anymore) +  some minor stuff
[CHANGED] travelreport printing including totals now and a new experimental .css file

R697 | 28.07.2010 22:58

[FIXED] bug with travels in tk report
[ADDED] warning when no coworker is selected

R696 | 28.07.2010 16:18

[ADDED] map/locations: different cursors indicate if things can be dragged or moved

R695 | 28.07.2010 16:02

[CHANGED] only coworker window table entries are deselectable for now
[ADDED] setDeselectable(bool) for generic window; call to change above behaviour

R694 | 28.07.2010 13:34

[FIXED] position sync: detect limit overflows (more records with same created_at than
        requested by limit parameter). Such cases stopped sync too early, since all records
        in the answer were already synced. Now, also an id > last_synced_id is requested.
[UPDATED] --> beta 3.1

R693 | 27.07.2010 19:17

[FIXED] garmin not recognized, resulting in not showing travels for coworkers
[CHANGED] when deselecting coworker now all travels without recognized garmin are shown

R692 | 27.07.2010 19:10

[CHANGED] door icons
[CHANGED] system queries trailer messages (status 209) from positions.xml to find last trailer

R691 | 27.07.2010 14:15

[CHANGED] made door icons slightly smaller

R690 | 21.07.2010 18:02

[CHANGED] Language files updated

R689 | 21.07.2010 17:58

[FIXED] system view: hide garmin destination actually

R688 | 21.07.2010 17:18

[ADDED] door icons (open, closed)
[FIXED] archive report: hiding columns x/y and user_data didn't work at startup
[FIXED] travel report, archive report: 'print' and 'map' buttons grew very big,
        applied layoutStretch so only one of the SpacerItems grows
[FIXED] system view: layout stuff with temperatures/doors
[REMOVED] system view: text "No Garmin". instead, the whole destination area is hidden

R687 | 21.07.2010 16:11

[CHANGED] Language files updated (source code if necessary corrected)

R686 | 20.07.2010 19:43

[ADDED] config window: check boxes to show/hide some fields in archive report
[ADDED] config window: check boxes to select temperature/door sensors to show
[ADDED] archive report: for status 215 (Euroscan), user_data is parsed with config values
[CHANGED] system view: layout, some connection things
[UPDATED] --> beta 3.0

R685 | 20.07.2010 19:33

[ADDED] print button with print preview in the system travel report; only basic functionality so far

R684 | 20.07.2010 18:13

[ADDED] print button/functionality with print preview in the coworker timekeeping dialog

R683 | 19.07.2010 18:49

[ADDED] set events active/deactive in osc3 though event observer still have to handle this correctly

R682 | 16.07.2010 18:30

[CHANGED] system fetches last temperatures and door states from webservice instead of local db
[FIXED] systemform: crash bug when trying to delete local db when no system is selected
[CHANGED] systemview: optimized layout space consumption of temp/door data
[ADDED] archivemodel shows user_data
[FIXED] mini translation bug
[CHANGED] location: when assigning a polygon, radius stays untouched
[UPDATED] --> beta 2.12

R681 | 16.07.2010 19:02

[UPDATED] map/polygons: interface to webservice
[ADDED] reading and showing of Euroscan data (temperature, doors)

R680 | 15.07.2010 18:56

[FIXED] selection bug after new
[FIXED] timekeeping travelreport should show up again

R679 | 14.07.2010 18:12

[FIXED] partly nasty selection bug; still occurs when seleecting "New" and reclicking in the table

R678 | 14.07.2010 15:08

[ADDED] position sync: detect connection timeouts and reset sync when hanging
[ADDED] map/polygons: highlight polygon coordinates when hovering
[UPDATED] --> beta 2.11

R677 | 14.07.2010 14:35

[FIXED] negative standing time in timekeeping travelreport

R676 | 14.07.2010 14:22

[CHANGED] timekeeping report; date changing should work now

R675 | 13.07.2010 17:33

[CHANGED] timekeeping report; when no coworker selected then all travels for that day are shown;
          else if selected coworker is set (atm by garmin id) in the travels of the day and the
          systems of the customer then they(the travels) for that customer are shown;
          still a day change issue to fix
[ADDED] ability in generic window to deselect a table entry and thus setting the underlying
        resource to 0 and emitting tableDeselect() but for now just coworkers are listening

R674 | 13.07.2010 16:33

[UPDATED] adapted system->trailer assignment to webservice behaviour
[FIXED] null pointer reference when dragging locations without having location window opened
[FIXED] distance calculation for locations

R673 | 13.07.2010 14:26

[UPDATED] --> beta 2.10

R672 | 13.07.2010 14:22

[CHANGED] positionsync: continue with next system if new list ends with same raw-data string as previous list

R671 | 09.07.2010 17:34

[ADDED] map: forwarding mouse events to children
[ADDED] map: moving polygon points works :)

R670 | 09.07.2010 12:24

[ADDED] icon for trailers

R669 | 08.07.2010 19:36

[CHANGED] timekeeping report according to Oschwald (with simple travel report) - yet have some open issues

R668 | 07.07.2010 11:50

[ADDED] time difference column in timkeeping daily model

R667 | 06.07.2010 17:46

[CHANGED] reverted server path to official

R666 | 06.07.2010 17:45

[ADDED] system: stay informed about Trailers associated to us
[ADDED] systemview: show Trailer info
[UPDATED] --> beta 2.9

R665 | 05.07.2010 16:29

[CHANGED] travel report / archive report: "add to locations" calls locationwindow's native function

R664 | 05.07.2010 15:08

[FIXED] map: zoom rectangle behaves well; don't change zoom level when creating new locations

R663 | 05.07.2010 14:01

[FIXED] event form: "notified-at" is not dependent on "already-notified"

R662 | 02.07.2010 18:10

[ADDED] map: zoom box (right click and drag)
[CHANGED] map/locations: ctrl+leftclick: new location; ctrl+rightclick: add polygon-point

R661 | 02.07.2010 16:21

[ADDED] map: zooming to a coordinate rect (zooom to a travel or position)
[FIXED] map: remove old travels when showing a new one
[CHANGED] enhanced memory usage
[UPDATED] --> beta 2.8

R660 | 02.07.2010 14:21

[FIXED] crash bug when starting locations window
[CHANGED] removed context menu from map (was annoying with right-clicks)

R659 | 01.07.2010 10:12

[FIXED] map disappeared

R658 - R618 | 29.06.2010 19:15 - 01.06.2010 18:08

• [UPDATED] --> beta 2.7
• [ADDED] polygon creation on map (create location by Shift + RightClick, then add polygon points by Ctrl + RightClick)
• [ADDED] prepared polygons for the map
• [CHANGED] travel report: filter positions with invalid timestamp
• [CHANGED] code cleanup at location calculation
• [UPDATED] --> beta 2.6
• [CHANGED] show alias systems in italics
• [CHANGED] timekeeping report: show position text (sorry for large code overhead)
• [ADDED] "visualize travels" button in archivereport
• [CHANGED] travelvisualizer can show a list positions without travel object
• [UPDATED] --> beta 2.5
• [CHANGED] private travels are masked
• [CHANGED] sync: fetch private positions (were discarded till now)
• [CHANGED] traveltotal: split total driving time to private/business
• [CHANGED] hide systemtimeline when there's no data
• [FIXED] build error on mac os gcc 4.2
• [CHANGED] Language files updated (source code if necessary corrected)
• [CHANGED] save dialog won't get destroyed on close
• [UPDATAED] Systems apparently have no customer name provided in xml any more. Find customer name from resources.
• [CHANGED] timekeeping.h: 'const float' threw compiler warnings
• [CHANGED] tkdailymodel: swapped 'position' and 'description'
• [ADDED] needed files for archive report and search dialog
• [ADDED] a small search dialog for searching over resources of all teams
• [ADDED] "archive" single position list (SystemWindow)
• [CHANGED] SystemWidget: systems with reject-connection flag set are colored red
• [CHANGED] removed timer and alarm positions from travel report
• [CHANGED] private positions are not synced at all anymore
• [UPDATED] --> beta 2.4
• [FIXED] timestamp in map was shown in UTC
• [FIXED] show timer and alarm in travel report
• [CHANGED] map source changed to arteco.de
• [ADDED] Sensor-Report integriert
• [CHANGED] replaced LocationWindow's map by OLMap
• [CHANGED] layout of locations in map
• [FIXED] travel report: start time was shown for stop time
• [CHANGED] code cleaning and minor stuff
• [ADDED] description column in daily timekeeping dialog
• [CHANGED] Beta 2.1 -> Beta 2.2
• [FIXED] timekeeping calculation
• [CHANGED] travel report: mark inconsistent travels with '*'
• [ADDED] map: visualization of locations
• [FIXED] map fullscreen mode (stop it by going to the main window and pressing ctrl+shift+M again there)
• [ADDED] position in timekeepings
• [FIXED] forgot olmap cpp's
• [CHANGED] travel report: detect new travel when drive number changes
• [CHANGED] .pro file to avoid problem with a current bug in creator 2.0 beta
• [FIXED] crash when main loginwindow is closed before mainwindow was initialized
• [FIXED] crash when systems are loaded while mainwindow is hidden
• [ADDED] prototype for circle drawing on map
• [CHANGED] naming of openstreetmap config
• [UPDATED] --> beta 2.1
• [CHANGED] map: switch map sources on the fly (via config window); system labels; respect group filter
• [FIXED] systemtimeline was broken by last checkin
• [ADDED] raw fullscreen support for map (Ctrl+Shift+M)
• qnam stuff as usual
• all working except when changing team in the wrong moment
• [UPDATED] system following by selecting in main window works
• [UPDATED] map: colored labels; fixed uninitialized label bug; travels with single positions;
• [CHANGED] keep zoom level when jumping to a selected system
• set app wide proxy in LoginWindow on login click
• auth callback to ResourcePool
• code cleaning
• [UPDATED] --> peter 2.0
• [CHANGED] olmap: travel visualization works
• [REMOVED] moved openlayers stuff to server
• [ADDED] travel drawing (incomplete)
• Switch to our openstreetmap server
• qnam stuff as usual
• [ADDED] some openlayers stuff - single custom built file, images, css
• [MOVED] olmap.html and OpenLayers.js to openlayers subdir
• [ADDED] map: show system names beside systems

R617 - R603 | 31.05.2010 17:05 - 04.05.2010 18:53

• [UPDATED] olmap: fixed redraw on zooming; added positioning on system;

no layer dragging when shift is pressed (zoom box drag); draw only items inside our viewport

• [CHANGED] mainwindow: removed zoom buttons
• [ADDED] advice form: new event types
• [CHANGED] commented out not-yet-supported events
• [ADDED] events: more status codes to be used for events
• [ADDED] system window: check box for 'reject connection'
• [UPDATED] --> beta 1.2
• [CHANGED] corrected project file
• [ADDED] the beginnings of an OpenLayers Qt API
• qnetmanager stuff
• [CHANGED] improved curvestring (memory usage and time)
• [CHANGED] QPainterPath is slow on very large travels (~10k positions).

Improved drawing of large travels by splitting them to multiple paths.

• [UPDATED] #226 fuel report: if there were no refueling in previous month,

use first refueling of requested month as reference value.

• [FIXED] typo in translation
• [UPDATED] enhanced course drawing algorithm
• [FIXED] added type declaration to template caller
• [CHANGED] group: order members alphabetically
• [ADDED] zlib path to .pro file
• [ADDED] started adding QNetworkAccessManager
• [ADDED] system window/table: show software version
• [CHANGED] PositionSync: Compare raw_data instead of id, to check for identity of positions.

Entries with lower id than last in local db now sync cleanly.

R602 - R593 | 30.04.2010 17:55 - 21.04.2010 20:09

• [CHANGED] genericwindow/resourcetablemodel: default filtering goes over all columns
• [CHANGED] BETA 1.0 -> 1.1
• [FIXED] bug with positionsync not using positions with TS:000000000 switched to pos->timestamp
• [CHANGED] mainwindow has to include config.h for OPENLAYERS define
• [FIXED] small misspellings
• [BRANCH] creating new branch from beta release
• [FIXED] crash bug in location window
• [REMOVED] || and () from label
• [CHANGED] space before map label of rendered without icon
• [ADDED] config for map label
• [CHANGED] version to BETA 1.0
• [FIXED] location info bug

Zur aktuellen Liste der OSCpc-Versionen