Sms Commands
Diese Seite ist unvollständig und noch in Bearbeitung.
SMS - Befehle
gprs {User,Password,AccessPointName} (Konfiguration der Provider-Zugangsdaten)
Beispiele:
gprs eplus:gprs@internet.eplus.de
gprs gps-system:t-d1@internet.t-d1.de
gprs gps-system:D2@web.vodafone.de
gprs gps-system:D2@m2m.vodafone.de
gprs gps-system:O2@internet
gprs ppp@A1plus.at:ppp@A1.net
gprs beeline:beeline@internet.beeline.ru
status (Get System-State)
delete | reset (for intern use)
update {[VersionNumber]} (update ohne Parameter = V2.29)
Legende:
bis V1.36
efb.img -> first-229.fw
efb2.img -> all-229.fw
ab V2.00 bis V2.29
all-last.fw -> all-229.fw
first-last.fw -> first-229.fw
little-last.fw -> little-229.fw
seit V2.30
all-latest.fw -> all-229.fw (Bootloader:0)
all-latest.bfw -> all-229.fw (Bootloader:1)
normal | rtk | dgps | cmr (Set System-Mode)
on | off | ein | aus (Schaltausgang)
spam | nospam (Set Position Spam[1Sec.] on/off)
dn {number} (Set Drive Number)
mc {value} (Set Move Check / 0 = off / Default = 50[512 = ca. 2G])
pc {value} (Set Power Check / 0 = off / Default = 250[ca. 8 Volt])
hb {hours} (Heartbeat / sendet alle "hours" eine Position)
ps {hours} (Power Save / schaltet nach "hours" die externe Stromversorgung und GPS aus)
pi {sec.} (Position Interval) (2 bis 300 Sekunden / Default = 60)
roaming {yes/no} (GPRS aus dem Ausland erlauben / Default = no)
SIM Speicherung (Platz-Belegung)
1 GSM_SIM_DATA_VERSION "5" (gsm.h) 2 g_sys_drives 3 g_osc_data_send_interval 4 g_osc_heartbeat 5 g_adc_move_check 6 g_adc_power_check 7 g_sys_ip_port 8 g_sys_device_ids (rip: g_gsm_provider) 9 g_sys_ntrip_streaming 10 g_sys_ntrip_mountpount 11 g_sys_time_to_power_safe 12 g_sys_ntrip_host 13 g_sys_ntrip_user 14 g_sys_ntrip_passwd 15 g_sys_ntrip_port 16 g_sys_rs232_gps 17 g_gsm_roaming_allowed 18 g_gsm_username 19 g_gsm_password 20 g_gsm_access_point_name (APN_1) 21 g_gsm_access_point_name (APN_2) 22 g_gsm_access_point_name (APN_3)
